Canon Printer Error Code 6a00
On my MP830, the purge unit is a white plastic assembly (on the right side of the printer where the print head homes) that is spring loaded on rides on a I packed it in padding and placed it in a hardside suitcase and brought it with me to Uruguay whereupon turning it on I am now at the point described above. Don't turn the power off as this will return the printhead to the far right and LOCK IT IN PLACE. This morning I got the 6A00 error message. this contact form
To remove the printhead, you need to use a small downward and forward pressure and then it will pull up and out. Thankyou so much - Anonymous 0 Hey,I've recently purchased a MP800. Printed three pieces of paper and now I have an error code. Bravo.
Canon Printer Error Code 6a00
Considering the amount of sticky ink on my fingers, I will defintely follow the instructions on cleaning the purge station. I was able to pull it out and the error code went away. This worked on our printer.Very much appreciated. - Anonymous For those of you in the USA, I believe the kind British person who write this post means to use a 'flashlight',
- Just send me an email requesting what you need, if you don't know then also give me the model of your canon product.
- I cleaned the jets and the rollers and also tried using the auto sheet feeded instead of the cassette.
- Close Yeah, keep it Undo Close This video is unavailable.
- Turn off the power cord, Even tfhe ON/OFF sw works fine.
- They should move downward and if they don't, then this may not fix your printer as it did mine.
- Can you help?
- You mentioned the white rocker are moves up and down, but this is very hard to see with the covers closed so you must have seen then when it was open.
This error is usually caused during power surges. both my lights flash and the print head does not slide (except manually). I don't want to force it too much if it isn't supposed to be moved manually! Error Code 6a00 Canon Pixma Ip6600d I started getting error code 1403, 11/19/2016 11/19/2016 crash2199 I have a pixma Pro-10 printer.
If printer is in warranty get it replaced by Canon. Canon Mp600 Error Code 6a00 If problem persists see the manual." The problem persists and the manual is of no use whatsoever. The sponge then drops back down when finished. see this I also blew some compressed air around hoping to clear any foriegn objects.
I was able to fix it by cleaning inside by the ink with a wet towel paper. - Simon Klein 0 Ive had problems with an MP780 but in UK under Canon Mp530 Check Printer 6a00 In this case, the best course of action is simply to wait a minute or two, and then try to execute your task again. After all, this is a cleaning station and it spits out ink just about everytime you turn the power on. Yahoo - working again. - unknown You have the most detailed and helpful steps on what a purge unit is and what to do with it to get rid of the
Canon Mp600 Error Code 6a00
Loading... The problematic behavior remains the same. Canon Printer Error Code 6a00 Moral is make sure that white plastic wiper can seat all of the way. Canon Mp610 Error 6a00 Took out all the ink cartridge, pushed the cartridge holder back and forth and cleaned the inside without taking it apart.
I followed the instructions to reseat the ink holder home pad, and the 6A00 Error problem was resolved! weblink How JustAnswer Works: Ask an Expert Experts are full of valuable knowledge and are ready to help with any question. Now the refurbished unit is making a loud crunching noise with error A600. I've tried moving the white assembly and moving the print head back and forth. Canon 6a00
Just in case someone stumbles across the same problem: Turns out I had only exported the Variables CEGMA and CEGMATMP once by hand and not added to my bashrc so they I was ready to give up, go out and buy an HP before I stumbled on this site.I moved the sliding piece with the wipers back and forth several times. As other have indicated, there are many things that can cause the purge cleaning station to lock up. navigate here Plugged power back on.This worked for me. - unknown Amusing that your post of almost a year ago was the right 'fix' for this vexing little problem with "Error 6A00" that
When I turn it on it makes a whirring noise, but there is no movement. Canon A6000 Is there a way to release the cartridge assembly to move it out of the park position?Thank you.John - unknown Appreciate to have your email address. Ask Andy Your Own Question Andy, Elec & Comp pro Category: Printers Satisfied Customers: 23538 Experience: 11yr exp, Comp Engg, Internet expert, Web developer, SEO 16465236 Type Your Printers Question Here...
I have turned the machine on and off, but always the same error.
Also the ink suction for cleaning the print-head is done by the purge unit.)4. by unknown on Sep 30, 2007 at 8:46pm Add comment Please sign in to comment 0 I have a canon MP500 and I've been getting the 6A00 code. AndyEdited by Andy on 11/14/2010 at 5:17 AM EST Andy, Elec & Comp pro Category: Printers Satisfied Customers: 23538 Experience:11yr exp, Comp Engg, Internet expert, Web developer, SEO Andy and Sony A600 The white rocker arms also move up and down during the start process but always the same 6A00 error.
It appears that the purge unit moves forward about 1/4 in.then stops and returns, but there's no sign of anything stopping it. That's what I get for being cost effect and ordering cheaper on the internet. What is it protecting? - Anonymous I have the code error 6A00 - managed to retrieve a bit of paper from the right hand side but I cantt actually move the his comment is here Push it down and off/on the machine.
Never had any problem with it. And yes I have found all those things in a purge unit. Thank You so much for the SUGGESTION !!!!This is a GREAT SITE ----> fixyourownprinter.comThanks Once Again! - Anonymous Anonymous - your fix worked. Also, when I open the printer the white thing on the far right side is always towards the front side of the printer.
by unknown on Nov 21, 2007 at 3:46pm Add comment Please sign in to comment 0 I encountered the same problem in a 6-month old machine and have been unable to The money they loose adds up. Tighten it again and no more problem.hooray -- good luckdc - unknown 1 I have a Pixma MP760 and it doesn't print. What does that mean?Customer: Is anyone there? Ask Your Own Printers Question Expert: mike6708 replied6 years ago.
Rating is available when the video has been rented. There you will find wiper blades that move from the rear to the front. Thank you so much!!bp - Anonymous Thank you so much to briceg for the very accurate description of the white plastic thingy ... Loading...
Since it's out of warranty, I figure any significant repair would cost more than printer is worth. If printer is in warranty get it replaced by Canon free of cost. Hello,Welcome to JustAnswer !!